- As of July 2026, routine marble polishing in Dubai is commonly planned at about AED 15-50 per sqm, depending on the floor condition, area and treatment.
- Grinding, crack or joint filling, stain treatment and full restoration can raise the range to roughly AED 60-120+ per sqm. Small areas may be priced as a minimum job rather than by area alone.
- Ask whether the quote is for cleaning, polishing, crystallization, honing or multi-stage grinding. These are not interchangeable scopes.
Last updated: July 2026
Marble polishing in Dubai can mean a light gloss refresh or a full stone-restoration process. The right scope depends on whether the floor is simply dull, scratched, etched by acidic spills, uneven at the joints, stained or affected by damaged grout.
The most useful quote identifies the stone and finish, records the damaged areas, names each treatment step and states whether moving furniture, edge work, filler, sealing and final cleaning are included. For related projects, compare the tile and grout repair guide, interior design cost guide and the marble polishing service page.
Marble Polishing Dubai Prices in 2026
Public Dubai prices vary widely because some providers advertise a basic polish while others include grinding, grout repairs or sealing. Use these as planning benchmarks and compare a written scope after a site inspection or a clear photo-and-area review.
| Typical scope | Dubai planning range | Usually suited to |
|---|---|---|
| Basic clean and polish | About AED 15-30 per sqm | Large, accessible floors with light dullness and no deep damage. |
| Standard polish or crystallization | About AED 30-50 per sqm | Noticeable traffic wear, light scratches and a more complete finish refresh. |
| Grinding and restoration | About AED 60-120+ per sqm | Deeper scratches, uneven joints, etching, filler work or several diamond-grinding stages. |
| Small bathroom, threshold or isolated area | Minimum-job or site quote | Areas where setup, edge work and access matter more than square metres. |
These are not fixed packages: treatment ranges can overlap when a floor needs a light grinding stage, detailed edge work or isolated repairs.
Polishing, Honing and Grinding Are Different
Polishing improves the surface sheen of stone that is already reasonably level. Honing produces a smoother, lower-sheen finish and can help correct light wear. Grinding removes more material with progressively finer diamond abrasives and may be needed for deeper scratches, lippage or a badly worn finish.
Crystallization is another finishing method used by some providers. It should not be treated as a substitute for crack repair, grout replacement or multi-stage grinding. Ask the Pro to explain why the proposed method fits your marble and to test an inconspicuous area when the stone or previous coating is uncertain.
What Changes the Final Quote?
- Condition: light dullness costs less to correct than deep scratches, etching, holes, cracks or missing joint filler.
- Total area: larger open floors are usually more efficient than small rooms, stairs, thresholds and detailed edges.
- Stone and finish: marble, limestone, travertine and engineered surfaces do not all use the same products or process.
- Furniture and access: occupied rooms, lift booking, parking, work hours and furniture movement can add labour.
- Protection and cleanup: skirting, joinery and adjacent flooring may need protection, followed by slurry extraction and detailed cleaning.
- Sealer and warranty: product type, coats, curing instructions and exclusions should be written rather than assumed.
What a Complete Marble Polishing Quote Should State
| Quote item | Detail to confirm |
|---|---|
| Measured area | Net square metres plus stairs, skirting, thresholds or excluded rooms. |
| Process | Cleaning, grit stages, honing, polishing or crystallization, with the intended finish. |
| Repairs | Cracks, chips, holes, grout or joint filler included, excluded or separately priced. |
| Protection and cleaning | Furniture responsibility, masking, slurry removal and handover cleaning. |
| Sealer | Product category, coverage, coats, curing time and realistic stain-resistance claim. |
Occupied Apartment and Villa Practicalities
A floor machine, wet vacuum and supplies need a clear route from parking or the service lift. Ask who moves heavy furniture and whether rooms will be completed in sections. Confirm water and power needs, noise hours, drying or curing time and when the floor can be walked on safely.
Regular maintenance normally differs from a renovation, but an apartment building or gated community may still require contractor registration, an entry permit, lift protection or approved working hours. Check the rules for the specific property before the team arrives.
Care After Polishing
Use a neutral cleaner recommended for natural stone and remove sand or grit that can scratch the finish. Avoid vinegar, lemon-based products and other acidic cleaners on marble. A penetrating sealer can improve stain resistance where suitable, but it does not make marble stain-proof or acid-proof.
How Bestimate Helps Compare Marble Polishing Quotes
Bestimate helps you send the same floor area, condition photos and required result to available local Pros. Compare the treatment stages, repair allowances, protection, cleaning, timing and warranty alongside the total price.
Updated July 2026. Bestimate reviewed public Dubai benchmarks from ArabCare, FloorPolishing.ae and MarbleCare. Stone-care guidance was checked against the Natural Stone Institute.
Prices are planning benchmarks, not guaranteed quotes. Final cost depends on floor area, stone, condition, grit stages, repairs, edge work, access, protection, cleaning, sealer, VAT and warranty.
Ready to compare local quotes?
Share the floor area and clear photos of dullness, scratches, stains and joints. Bestimate helps you compare available local Pros by process, price, timing and terms.
Compare marble polishing quotes now
Free requestNo obligationLocal Pros
Bestimate reviews UAE home-service guides for local pricing context, scope clarity, property access and practical quote comparison.
This guide was checked in July 2026 against public Dubai pricing and Natural Stone Institute care guidance.
Frequently asked questions
How much does marble polishing cost in Dubai?
Routine work is commonly planned at about AED 15-50 per sqm in July 2026. Grinding, filling and heavier restoration may cost roughly AED 60-120+ per sqm. Small or difficult areas may have a minimum-job price.
Can polishing remove deep scratches and stains?
Light wear may improve with polishing, but deep scratches can require grinding and some stains need separate treatment. A stain that has penetrated the stone may not disappear completely. Ask for a test patch and a realistic result description.
Is marble crystallization the same as restoration?
No. Crystallization is a finishing method. Restoration may also include grinding, honing, crack or chip filling, joint repair and stain treatment. Compare the named steps, not only the promised shine.
Does marble sealer stop all stains and etching?
No. A suitable penetrating sealer can make some stone more stain-resistant, but it does not make marble stain-proof and it does not prevent acidic substances from etching the surface.
How long before I can walk on polished marble?
It depends on the process and whether filler or sealer is used. Ask the Pro for separate times for light foot traffic, furniture replacement, cleaning and full curing, then follow the product-specific instructions.
