Quick answer
A new socket means adding a usable electrical point, not swapping a faceplate. One Dubai provider advertises new power points at AED 300–600; another gives a broader AED 200–600+ planning band covering sockets, lights and appliance points. Neither establishes the price of a new circuit, long concealed cable route or repaired decorative wall. Ask for an assessed, itemised scope.
This guide is for a new indoor power point in an existing Dubai home. The decision is where the electrician can safely obtain supply, how the cable will reach the proposed position, and what the room will look like afterwards. Replacing a damaged existing socket is a different job. A cooker, outdoor installation or EV charger may also need a different design rather than another ordinary outlet.
Start with the appliance and intended position
Tell the electrician what you want to plug in, not only how many sockets you want. A desk with chargers, a kitchen appliance and a utility-room machine are different loads and locations. Record the appliance rating from an accessible label or manual; do not move a heavy appliance or open equipment to find it. A double socket creates more connection positions, not proof that the circuit can supply every connected appliance at once.
The DEWA electrical-installation regulations address circuit loading, protective conductors and inspection/testing. They are a design reference for the professional, not a DIY wiring recipe. Ask the contractor to identify the applicable requirements and approval route for your actual alteration. This article does not specify cable sizes, breaker ratings or a universal number of sockets per circuit.
What the available Dubai prices actually cover
| Public reference checked 17 September 2026 | Advertised AED amount | Comparison limit |
|---|---|---|
| SSTS: new power point | 300–600 | Obtain included cable length, socket, containment, testing, VAT and finish; do not assume a dedicated new circuit. |
| SKN: new socket, light or appliance point | 200–600+ directional band | Mixed point types, not a fixed socket-only package. Written assessment determines route and scope. |
| New circuit, board alteration or extensive concealed route | Site-specific quotation | Neither reference gives a comparable complete price for these works. |
These are indicative planning references, not quotes or Bestimate transaction averages. Do not combine the lowest number from one scope with the highest from another to create a supposed market average. A quotation should say whether the visit is charged separately, credited against work, or included, and whether materials and VAT are already in the total.
New Socket Installation Quote Comparison
Use actual written provider quotes for the same assessed work. This comparison uses your entered prices; it is not a market estimate, a diagnosis or a promise of the final invoice. Keep unpriced or excluded work visible before comparing totals.
A new socket point is not a faceplate replacement. Mixed routes or circuit changes should use an assessed whole-job amount. No circuit capacity is inferred from this tool.
Open the full-screen quote comparison and methodology.
Surface route, concealed route or a new circuit?
| Proposed scope | What changes | What to have written down |
|---|---|---|
| Additional point with visible containment | Cable route remains visible; wall opening may be limited | Route drawing/photo markup, containment finish, socket position and circuit assessment. |
| Concealed cable route | Chasing or opening may affect plaster, tile, cabinetry or ceiling | Opening extent, hidden-service checks, dust protection, reinstatement and painting boundary. |
| Dedicated circuit or distribution-board work | Design, protection and testing extend beyond the new faceplate | Load assessment, board capacity, route, required approvals and completion documentation. |
| Point near water or exposed outdoors | Location suitability and environmental protection become central | Specialist assessment; do not substitute a generic indoor-socket package. |
Ask for two route options when appearance and disruption matter. A visible route may be acceptable behind a desk but not across a finished feature wall. Conversely, a concealed route should not be chosen solely because it is invisible: the contractor must assess the substrate and services before any opening. Do not tell a worker to drill through an unknown wall because an online diagram looks convenient.
The finish is part of the job
‘Making good included’ can mean filling the channel, not matching the whole wall. Agree whether the quote includes plaster repair, primer, paint, tile replacement or cabinet alteration, and who obtains matching materials. A patched strip may remain visible under side lighting even when the electrical work is complete. Photograph the intended area before work and ask for the finish boundary in writing.
For wider labour context, see the Dubai electrician cost guide. If the route needs a ceiling opening, the false-ceiling scope guide helps separate electrical access from board and paint work. If this is part of a kitchen redesign, use the kitchen renovation guide to coordinate outlets before cabinetry is finalised.
A useful quote has more than a price per point
- Location schedule: room, intended use, socket count and whether each item is new, relocated or replaced.
- Electrical scope: assessment of the existing supply and circuit, new cable/containment, accessory specification, isolation and required testing.
- Route allowance: included length and the written method for approving a longer or changed route after inspection.
- Property work: protection, cutting/opening, removal of waste, closure and the agreed finish—not an undefined ‘minor civil work’ line.
- Commercial terms: inspection-only charge, labour/material split, VAT status, permission coordination, warranty and a change-approval process.
Compare the completed job, not just the electrician's attendance. If one quote excludes painting and another includes it, keep that difference visible until the missing amount is supplied. An unknown item is not free. A low quoted total is not necessarily comparable when the circuit assessment is still pending.
Safe preparation and handover
- Send a room photo and mark the preferred position without removing plates or covers. Include intended appliances and approximate route constraints.
- Confirm property-manager permission, noisy-work hours and contractor access before booking. New loads or circuit changes need the contractor to identify any additional approvals.
- Clear the work area and arrange access to the relevant equipment without opening it yourself. Agree who handles heavy furniture.
- At handover, obtain the installed accessory details, circuit identification, testing record appropriate to the work, and separate electrical and finish warranties.
Stop using existing fittings if they are hot, scorched, sparking or smell burnt. Keep away from exposed conductors and wet electrical areas, and do not repeatedly reset a tripping breaker. Use a qualified electrician; adding a new socket is not a workaround for an unresolved fault. Do not open a distribution board or attempt a temporary extension of concealed wiring.
Read the Socket Installation Services in Dubai service overview before enquiring. Confirm that the provider accepts the precise repair or installation scope described here, then send the same brief when comparing quotes.
Compare a complete new-socket scope
Describe the intended appliances, socket positions and preferred finish. Compare multiple quotes for free with circuit assessment, cabling, wall work and testing listed separately.
Compare Quotes for FreeFrequently asked questions
How much is a new socket in Dubai?
Reviewed provider references include AED 300–600 for a new power point and a separate mixed-point planning band of AED 200–600+. The actual price depends on assessment, route, materials, finish and testing. These are not fixed quotes.
Is a new socket the same as replacing one?
No. Replacement uses an existing point subject to condition checks. A new point introduces a cable route and a circuit-capacity decision, so a replacement-only offer is not an appropriate total.
Can the nearest socket supply the new one?
Only the electrician's assessment can establish a suitable supply route. Distance alone does not establish circuit suitability, protection or permitted loading.
Does installation include repainting?
Not automatically. Ask whether the finish stops at filling or includes primer and paint, and whether the agreed scope is a patch or a larger wall area.
Can I choose the socket before inspection?
You can share a preferred appearance and functions, but let the electrician confirm suitability for the appliance, location and installation before purchase.
Sources and review method
Reviewed 17 September 2026 by Bestimate Editorial Team. Two public provider references are attributed individually, with unspecified inclusions retained as unknown. DEWA guidance informs professional design/testing questions; no universal wiring layout, approval exemption or guaranteed completion time is offered.
